| Description | |
- Certified to meet EN54 requirement
- Lockable to base to stop unauthorised removal
- Remote LED output
- Compatible with all Fyreye bases
|
- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
|
- Low profile shape
- The detector is solar blind and incorporates an electronic filter to eliminate unwanted alarms from naturally occurring phenomena
- Fast response time
- High immunity to electrical noise & RF interference
| Low profile or deep diode mounting base for the Fyreye MKII range of conventional detectors. | |
| Content | Zeta Call Point Key
Replacement Plastic Key (1) for New Zeta Manual Call Points (Black Key) | Fyreye MKII Conventional Fixed Heat Detector
The Fyreye MKII fixed heat detector (MKII-HF) has a single thermistor arrangement that gives an alarm at a temperature of 90°C.
The detector will work with most modern fire alarm control panels, and comes supplied with a locking grub screw to prevent unauthorised head removal.
Each Fyreye detector requires a base | Gent Indoor Conventional Manual Call Point
Conventional call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red and available in surface mounting options. The manual call points all have a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass and resettable operating elements can be used in the standard unit by a yellow strip on the element, which becomes visible when activated.
The element may be protected against accidental operation with a hinged transparent cover.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch; thus, a full functional test is achieved. | Fyreye Ultra-Violet Flame Detector
The Fyreye ultra-violet flam detector is particularly suited to applications where flames can be expected to develop initially rather than smoke. This is typically due to the nature of the materials being protected for instance camera film, computer, audio & videotapes or disks.
The detector is for indoor use only and should not be exposed to spurious sources of UV, such as sparks, uncovered halogen lights, lightning, etc. as these may trigger a false alarm.
Due to the operational nature of flame detectors, it is generally recommended to fit just one detector per zone. | Fyreye MKII Diode Base
Low profile or deep diode mounting base for the Fyreye MKII range of conventional detectors. | Apollo SC2900-001 Conventional Manual Call Point
The Conventional Manual Call Point has been designed to operate on a zone of conventional fire detection devices. An alarm is initiated by pressing the resettable element. Activation status is indicated through the rotation of the resettable element displaying yellow and black indication bars and an illuminated solid red LED.
The supplied reset key can easily reset the manual call point from the front. The Conventional Manual Call Point is supplied with a 470Ω resistor and normally open, clean contact electrical options. LED illuminated red only when the manual call point is operated in 470Ω mode. |
Reviews
There are no reviews yet.