| Description |
- Fully compliant with EN54, Part 11.
- Choice of re-settable or glass operating element option.
- Semi-flush or surface mounting.
- 470 Ohm resistor.
|
- EN54-11 approved.
- Very high visibility of the alarm condition.
- New efficient and reliable mechanism.
- High impact resistant ABS glass fibre material Fully patented.
- Quick and Easy Installation.
| | |
- Unique ‘Plug & Play installation concept
- Total ‘Flex-Ability’ in the choice of the operating element
- Anti-Tamper facility
- Enhanced aesthetics
- Fully approved to the latest standards
- Backward compatibility
- CPD Approved
|
- High visibility status LED
- Standard and weatherproof versions are available
- Wide range of accessories
- Heavy duty terminals
- Quick and simple to install
- Fast-fit clip on the front cover
- A single tool for test and access
|
| Content | Gent Indoor Conventional Manual Call Point
Conventional call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red and available in surface mounting options. The manual call points all have a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass and resettable operating elements can be used in the standard unit by a yellow strip on the element, which becomes visible when activated.
The element may be protected against accidental operation with a hinged transparent cover.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch; thus, a full functional test is achieved. | Zeta CP4 Conventional Surface or Flush Manual Call Point
The ZT-CP4 is a resettable manual call point with unique and innovative features. It has been designed to obtain maximum visibility, high reliability in operation and a pleasant aesthetical appearance.
When the resettable element is pressed, the spring mechanism mimics the feel of a break glass, and the resettable element goes back.
A completely new action system performs well and guarantees alarm detection in every condition.
A reflective polyester flag appears at the bottom of the operating face, providing the highest levels of visibility for the user. At the heart of the call point, a spring-free mechanism is used to operate the flag and the switch via a patented design. This allows for long life and trouble-free operation. | Zeta Call Point Key
Replacement Plastic Key (1) for New Zeta Manual Call Points (Black Key) | Zeta Manual Call Point Cover
Zeta Perspex Cover for ZT-CP3 & ZT-CP3/AD Call Points. | KAC Conventional Indoor Manual Call Point
Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.
Installation time and, ultimately, cost is of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique ‘plug and play’ concept to reduce installation time. All new MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then connected to the back of the MCP. Simple but effective, with no re-termination required and no time wasted.
New standards and legislation allow break glass and resettable operating elements to be used within a manual call point. To provide you with the greatest ‘flex-ability’, the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.
All MCP indoor call point products also help preserve the integrity of the overall system, as illegal removal of the product lid will result in the call point operating and the system going into alarm.
Full compliance with the latest standards is essential, and the new MCP indoor call point range is fully approved to the latest EN54-11 standard (Compliant markings only).
The MCP1A product version has a resistor and normally open, clean contact electrical options. These options are easily utilised by simply connecting the terminal block to the required connection in the back of the MCP1 product. Various resistor versions are available, with both 470W and 680W offered as standard. However, other resistor types can be provided upon request. The MCP1B product version allows for connection to ‘Savwire’ systems. | Cooper Menvier Callpoint optional Weatherproof
This attractively designed, simple-to-install range of call points has been specifically developed to be compatible with Menvier conventional fire panels. There are two versions of call points in this range. The MBG914 can be either surface or flush mounted, and the MBG917 is weatherproof. All call points are supplied as standard with a frangible glass element and a test key for ease of maintenance. A comprehensive range of accessories is available to maximise the functionality of the call point for particular applications. |
Reviews
There are no reviews yet.