| Content | Xtratone MKII Addressable Sounder in Red or White
The Xtratone sounders are small, high-output addressable devices designed to meet EN54 part 3.
A device is a compact unit that fits a standard European back box and can be surface or semi-flush mounted.
The Xtratone sounder has been designed to terminate field cables in the back box as a first fix. | Infinity ID2 2, 4 or 8 Zone Fire Alarm Kit
The ID2 is the most flexible and advanced two-wire system on the market. Installers benefit from a choice of radial or loop wire modes. In the case of the radial configuration, no end of lines are required, and devices can be spurred off one another. Following the auto-configuration, each device on the system can be given a 20-character description. This means in the event of a fire or fault, the exact device will be displayed on the panel's LCD display (for instance, “Main Office” or “Bedroom 1”).
The infinity ID2 system is priced very competitively, and by starting with one of these kits, you will save even more. By purchasing this kit, you will benefit from 1 free detector, two free batteries, one free Mains Safety Isolator, and a free check-it tester spray over purchasing the panel, six detectors and 2 Manual Call Points separately. | KAC Conventional Indoor Manual Call Point
Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.
Installation time and, ultimately, cost is of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique ‘plug and play’ concept to reduce installation time. All new MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then connected to the back of the MCP. Simple but effective, with no re-termination required and no time wasted.
New standards and legislation allow break glass and resettable operating elements to be used within a manual call point. To provide you with the greatest ‘flex-ability’, the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.
All MCP indoor call point products also help preserve the integrity of the overall system, as illegal removal of the product lid will result in the call point operating and the system going into alarm.
Full compliance with the latest standards is essential, and the new MCP indoor call point range is fully approved to the latest EN54-11 standard (Compliant markings only).
The MCP1A product version has a resistor and normally open, clean contact electrical options. These options are easily utilised by simply connecting the terminal block to the required connection in the back of the MCP1 product. Various resistor versions are available, with both 470W and 680W offered as standard. However, other resistor types can be provided upon request. The MCP1B product version allows for connection to ‘Savwire’ systems. | Gent ES Heat Conventional Detector
The ES Detect automatic detector is a non-addressable detector specifically designed for operation on conventional systems. The range includes intelligent algorithms for fire detection and a wide range of different types of detectors. The Optical Smoke Detector is designed to guarantee safe and early fire detection.
Optical smoke detector
Optical smoke detector to guarantee safe and early detection of fire. | Fyreye MKII Conventional Optical Detector
The Fyreye MKII optical smoke detectors use a pulsing IR LED & photodiode to detect IR scatter caused by smoke entering the chamber.
The detector is particularly suitable for detecting optically dense smoke, involving materials such as soft furnishings, PVC, plastic, foam and all similar materials which produce small visible particles (0.5 to 10μm).
The detector will work with most modern fire alarm control panels, and comes supplied with a locking grub screw to prevent unauthorised head removal.
Each Fyreye detector requires a base | Raptor MKII Addressable Weatherproof Sounder in Red or White
The Raptor addressable sounder is a large weatherproof horn sounder suitable for many indoor & outdoor applications.
It is available in red or white and has 16 tones selectable at the control panel. Termination of field wiring is made to the backbox for a clean first fix. |
Reviews
There are no reviews yet.