Zeta CP4 Conventional Surface or Flush Manual Call Point

In Stock
£15.80
In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
EAN: 5080000035702 Categories: , , ,
  • EN54-11 approved.
  • Very high visibility of the alarm condition.
  • New efficient and reliable mechanism.
  • High impact resistant ABS glass fibre material Fully patented.
  • Quick and Easy Installation.

Description

Zeta CP4 Conventional Surface or Flush Manual Call Point

The ZT-CP4 is a resettable manual call point with unique and innovative features. It has been designed to obtain maximum visibility, high reliability in operation and a pleasant aesthetical appearance.

When the resettable element is pressed, the spring mechanism mimics the feel of a break glass, and the resettable element goes back.
A completely new action system performs well and guarantees alarm detection in every condition.

A reflective polyester flag appears at the bottom of the operating face, providing the highest levels of visibility for the user. At the heart of the call point, a spring-free mechanism is used to operate the flag and the switch via a patented design. This allows for long life and trouble-free operation.

  • Maximum Voltage : 30V
  • Minimum Voltage :
    • Indoor (ZT-CP4 & ZT-CP4/F) :
      • 4.5V if LED with R1 is chosen
      • 6.0V if LED withh R2 is chosen
    • Outdoor (ZT-CP4/WP) :
      • 5.0V if LED with R1 is chosen
      • 6.0V if LED with R2 is chosen
  • Current Rating (non-operated) : 0mA
  • Current Rating (operated) :
    • Indoor (ZT-CP4 & ZT-CP4/F) :
      • 18 mA @ 12V - R1
      • 13 mA @ 12V - R2
      • 45 mA @ 24V - R1
      • 31 mA @ 24V - R2
    • Outdoor (ZT-CP4/WP) :
      • 19 mA @ 12V - R1
      • 13 mA @ 12V - R2
      • 45 mA @ 24V - R1
      • 31 mA @ 24V - R2
  • Cable Termination : 0.5 - 2.5 mm2
  • Operating Temperature : -30 / +70°C
  • Humidity : 0 - 95%
  • IP Rating :
    • Indoor (ZT-CP4 & ZT-CP4/F) : IP42
    • Outdoor (ZT-CP4/WP) : IP67
  • Material : ABS/Polycarbonate/PA6 + Glass Fiber

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Quick Comparison

SettingsZeta CP4 Conventional Surface or Flush Manual Call Point removeFyreye MKII Conventional Optical Smoke Detector removeInfinity ID2 2-8 Zone Fire Alarm Panel removeZeta CP3 Call Point Perspex Cover removeFyreye MKII Conventional Fyreye Fixed Heat (CS) Detector removeFyreye MKII Combined Smoke and Heat Detector remove
NameZeta CP4 Conventional Surface or Flush Manual Call Point removeFyreye MKII Conventional Optical Smoke Detector removeInfinity ID2 2-8 Zone Fire Alarm Panel removeZeta CP3 Call Point Perspex Cover removeFyreye MKII Conventional Fyreye Fixed Heat (CS) Detector removeFyreye MKII Combined Smoke and Heat Detector remove
Image
SKU
Rating
Price£15.80£18.56£332.80£750.43£2.95£14.79£24.12
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Read more

Add to basket

Add to basket

Add to basket

Description
  • EN54-11 approved.
  • Very high visibility of the alarm condition.
  • New efficient and reliable mechanism.
  • High impact resistant ABS glass fibre material Fully patented.
  • Quick and Easy Installation.
  • Certified to meet EN54 requirement
  • Lockable to base to stop unauthorised removal
  • Remote LED output
  • Compatible with all Fyreye bases
  • One-man walk test facility
  • Ability to isolate zones/sounder circuits
  • High visibility blue LCD screen as standard
  • A deeper version panel is available if larger batteries required
  • Full range of zone-powered devices is available
  • Auto-configuration for easy setup
  • Safer than a traditional 2-wire/conventional system as it tells you exactly where the event is - no time wasted searching a whole zone
  • Is the system already wired as a loop? No problem! Just select ‘Loop Mode’ in the panel.
  • Designed to meet EN54 requirement
  • Lockable to base to stop unauthorised removal
  • Remote LED output
  • Compatible with all Fyreye MkII bases
  • Certified to meet EN54 requirement
  • Lockable to base to stop unauthorised removal
  • Remote LED output
  • Compatible with all Fyreye bases
Content

Zeta CP4 Conventional Surface or Flush Manual Call Point

The ZT-CP4 is a resettable manual call point with unique and innovative features. It has been designed to obtain maximum visibility, high reliability in operation and a pleasant aesthetical appearance. When the resettable element is pressed, the spring mechanism mimics the feel of a break glass, and the resettable element goes back. A completely new action system performs well and guarantees alarm detection in every condition. A reflective polyester flag appears at the bottom of the operating face, providing the highest levels of visibility for the user. At the heart of the call point, a spring-free mechanism is used to operate the flag and the switch via a patented design. This allows for long life and trouble-free operation.

Fyreye MKII Conventional Optical Detector

The Fyreye MKII optical smoke detectors use a pulsing IR LED & photodiode to detect IR scatter caused by smoke entering the chamber. The detector is particularly suitable for detecting optically dense smoke, involving materials such as soft furnishings, PVC, plastic, foam and all similar materials which produce small visible particles (0.5 to 10μm). The detector will work with most modern fire alarm control panels, and comes supplied with a locking grub screw to prevent unauthorised head removal. Each Fyreye detector requires a base 

Infinity ID2 2-8 Zone Fire Alarm Panel

Zeta Alarm Systems is proud to introduce the most advanced 2-wire system on the market. We can now provide a system that gives all of the benefits associated with a ‘2 Wire’ installation (less cable, quicker installation, cost savings on labour/product) and has the facility to ‘I.D.’ the devices. The Infinity ID2 can be used for new installations, as a retrofit for any conventional system or as a replacement for existing 2-wire systems when the extra features are deemed desirable/necessary. This is possible because the Infinity ID2 devices sit on radial circuits, thus making it easy to ‘upgrade’ a system with the facility to I.D. devices without the need to rewire.

Zeta Manual Call Point Cover

Zeta Perspex Cover for ZT-CP3 & ZT-CP3/AD Call Points.
The Fyreye MkII optical smoke detectors use a pulsing IR LED & photodiode to detect IR scatter caused by smoke entering the chamber. The detector is particularly suitable for detecting optically dense smoke involving materials such as soft furnishings, PVC, plastic, foam and all similar materials which produce small visible particles (0.5 to 10μm).. The Fyreye fixed heat detector MKII-HF/CS90 gives an alarm above 86°C.

Fyreye MKII Combined Smoke and Heat Detector

The MKII-OH incorporates both an optical chamber and heat sensing element with advanced detection technology and discrimination algorithms. This dual sensor is the perfect replacement to ionisation detectors. Each Fyreye detector requires a base
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Enclosure

Metal, Standard

Zones

2 Zone, 4 Zone, 8 Zone

Zeta CP4 Conventional Surface or Flush Manual Call Point £15.80
In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare
Shopping Cart

No products in the basket.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare